APC SurgeArrest Panelmount 208/120V 160KA Gray 208 V

APC SurgeArrest Panelmount 208/120V 160KA. Nominal input voltage: 208 V, AC input frequency: 50 - 60 Hz, Peak current, normal mode: 160000 A. Product color: Gray, EMI/RFI noise filtering: 30 dB, Response time: 0.000001 ms. Weight: 37 lbs (16.8 kg), Width: 16.5" (418 mm), Depth: 5.98" (152 mm). Certification: UL 1283,UL 1449,cUL. Package width: 19.3" (490 mm), Package depth: 12" (305 mm), Package height: 25" (635 mm)
Manufacturer: APC
SKU: 2289524
Manufacturer part number: PMF4DS-A
Vendor: Synnex
MSRP: $3,585.00
$2,299.47
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
SurgeArrest Panelmount 208/120V 160KA w/ Disconnect & Surge Counter High quality TVSS for datacenters, industrial facilities and commercial buildings. Alarm contacts Enables remote monitoring of TVSS alarm status. Replaceable individual phase modules Significantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients. Protection Working Indicator SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge. Lightning and Surge Protection To prevent damage to your equipment from power surges and spikes. Noise Filtering 120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise that can cause data loss and keyboard errors. 40kA and 80kA units do not contain noise filtering components, so they can be used with powerline networking systems (X10, HomePlug, PLC, etc.). Maximum surge current ratings 40kA, 80kA and 120kA per phase maximum surge current ratings, for all your residential, commercial and individual equipment protection needs. Catastrophic Event Protection SurgeArrest Panelmount SPDs are equipped with fuses and thermal disconnects that react quickly to protect against dangerous high and low current wiring faults as well as other catastrophic surge events. These panelmount SPDs are passive, and continue to allow power through to your home or building if any of the surge components are damaged. Status Indicator LED's LED status indicators for each phase and an audible alarm provide immediate failure notification when suppression circuitry has been damaged by a heavy strike or surge. Physical Size For easy installation inside your circuit breaker panel (40kA model) or next to your power distribution panels. (80kA and 120 kA models) Chase nipple connection Allows for mounting of the PM2X units rigidly to the side of your panelboard.
SurgeArrest Panelmount 208/120V 160KA w/ Disconnect & Surge Counter High quality TVSS for datacenters, industrial facilities and commercial buildings. Alarm contacts Enables remote monitoring of TVSS alarm status. Replaceable individual phase modules Significantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients. Protection Working Indicator SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge. Lightning and Surge Protection To prevent damage to your equipment from power surges and spikes. Noise Filtering 120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise that can cause data loss and keyboard errors. 40kA and 80kA units do not contain noise filtering components, so they can be used with powerline networking systems (X10, HomePlug, PLC, etc.). Maximum surge current ratings 40kA, 80kA and 120kA per phase maximum surge current ratings, for all your residential, commercial and individual equipment protection needs. Catastrophic Event Protection SurgeArrest Panelmount SPDs are equipped with fuses and thermal disconnects that react quickly to protect against dangerous high and low current wiring faults as well as other catastrophic surge events. These panelmount SPDs are passive, and continue to allow power through to your home or building if any of the surge components are damaged. Status Indicator LED's LED status indicators for each phase and an audible alarm provide immediate failure notification when suppression circuitry has been damaged by a heavy strike or surge. Physical Size For easy installation inside your circuit breaker panel (40kA model) or next to your power distribution panels. (80kA and 120 kA models) Chase nipple connection Allows for mounting of the PM2X units rigidly to the side of your panelboard.
Products specifications
Attribute nameAttribute value
Depth5.98"
Weight37 lbs
Package width19.3"
Package depth12"
Package height25"
CertificationUL 1283,UL 1449,cUL
Operating temperature (T-T)-20 - 65 °C
Nominal input voltage208 V
Non-operating altitude0 - 118110.2"
Input connections5-wire(3PH+N+G)
Packaging net weight41.1 lbs
EMI/RFI noise filtering30 dB
Peak current, normal mode160000 A
Peak current, common mode80000 A
Width16.5"
Height22"
Response Time0.000001 ms
Product colorGray
Storage temperature (T-T)-40 - 65 °C
Operating relative humidity (H-H)0 - 95 %
Storage relative humidity (H-H)0 - 95 %
LED indicatorsY
Audible alarm(s)Y
Operating altitude0 - 118110.2"
Wall mountableY
AC input frequency50 - 60 Hz
*
*
*
Products specifications
Attribute nameAttribute value
Depth5.98"
Weight37 lbs
Package width19.3"
Package depth12"
Package height25"
CertificationUL 1283,UL 1449,cUL
Operating temperature (T-T)-20 - 65 °C
Nominal input voltage208 V
Non-operating altitude0 - 118110.2"
Input connections5-wire(3PH+N+G)
Packaging net weight41.1 lbs
EMI/RFI noise filtering30 dB
Peak current, normal mode160000 A
Peak current, common mode80000 A
Width16.5"
Height22"
Response Time0.000001 ms
Product colorGray
Storage temperature (T-T)-40 - 65 °C
Operating relative humidity (H-H)0 - 95 %
Storage relative humidity (H-H)0 - 95 %
LED indicatorsY
Audible alarm(s)Y
Operating altitude0 - 118110.2"
Wall mountableY
AC input frequency50 - 60 Hz