Black Box LR0301A-KIT network extender Network transmitter & receiver Blue

Black Box LR0301A-KIT. Type: Network transmitter & receiver, Data transfer rate: 2048 Mbit/s. Cabling technology: 10/100Base-T(X). Product color: Blue. AC input voltage: 110-220 V, AC input frequency: 50 - 60 Hz, Power consumption (typical): 12 W. Width: 9.84" (250 mm), Depth: 5.91" (150 mm), Height: 1.69" (43 mm)
Manufacturer: BLACK BOX
SKU: 2892083
Manufacturer part number: LR0301A-KIT
Vendor: Synnex
MSRP: $1,196.99
$891.79
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Quick Facts - Kit includes two extenders. - Bridges 10BASE-T/100BASE-TX Ethernet across a single T1/E1 line. - Support speeds up to 1.544 Mbps on T1 and 2.048 Mbps on E1. - Supports Fractional E1/T1 in framed and unframed mode.
Further Details - Autosensing, autonegotiating 10-/100-Mbps LAN connections. - Auto MDI/MDI-X means you never need a crossover cable on the Ethernet side. - DIP switches make configuration easy. - Line build-out (LBO) capability. The pair of extenders included with this kit act as a bridge, enabling you to link two Ethernet networks across T1/E1. Because you're using leased lines provided by your telco, there are no distance limitations—you can extend your network anywhere you can get a T1 line. The T1/E1 Ethernet Network Extender converts protocols and data from Fractional T1/E1 to 10BASE-T/100BASE-TX Ethernet and supports both framed and unframed modes with line codes. The extenders are easy to install—just connect them then configure them using simple DIP switches.
Quick Facts - Kit includes two extenders. - Bridges 10BASE-T/100BASE-TX Ethernet across a single T1/E1 line. - Support speeds up to 1.544 Mbps on T1 and 2.048 Mbps on E1. - Supports Fractional E1/T1 in framed and unframed mode.
Further Details - Autosensing, autonegotiating 10-/100-Mbps LAN connections. - Auto MDI/MDI-X means you never need a crossover cable on the Ethernet side. - DIP switches make configuration easy. - Line build-out (LBO) capability. The pair of extenders included with this kit act as a bridge, enabling you to link two Ethernet networks across T1/E1. Because you're using leased lines provided by your telco, there are no distance limitations—you can extend your network anywhere you can get a T1 line. The T1/E1 Ethernet Network Extender converts protocols and data from Fractional T1/E1 to 10BASE-T/100BASE-TX Ethernet and supports both framed and unframed modes with line codes. The extenders are easy to install—just connect them then configure them using simple DIP switches.
Products specifications
Attribute nameAttribute value
Width9.84"
TypeNetwork transmitter & receiver
Data transfer rate2048 Mbit/s
Power consumption (typical)12 W
Depth5.91"
Height1.69"
Product colorBlue
Operating temperature (T-T)0 - 50 °C
Ethernet LAN (RJ-45) ports2
Cabling technology10/100Base-T(X)
Operating relative humidity (H-H)5 - 95 %
LED indicatorsY
On/off switchY
AC input frequency50 - 60 Hz
AC input voltage110-220 V
VGA (D-Sub) ports quantity1
*
*
*
Products specifications
Attribute nameAttribute value
Width9.84"
TypeNetwork transmitter & receiver
Data transfer rate2048 Mbit/s
Power consumption (typical)12 W
Depth5.91"
Height1.69"
Product colorBlue
Operating temperature (T-T)0 - 50 °C
Ethernet LAN (RJ-45) ports2
Cabling technology10/100Base-T(X)
Operating relative humidity (H-H)5 - 95 %
LED indicatorsY
On/off switchY
AC input frequency50 - 60 Hz
AC input voltage110-220 V
VGA (D-Sub) ports quantity1